Overhanging Flat Rain Cover
The flat cover extends beyond the upright supports and has rounded corners. It provides overhead shelter for the opening without enclosing the disposal area.
OTM-16A 50 L Public Waste Bin with an Overhanging Rain Cover
A raised flat canopy above wood-look panels, with collection access through the side. The OTM-16A pairs a powder-coated galvanized steel body with vertical PS wood-look slats. Two upright supports hold the rain cover above the disposal area. A lockable side door gives staff access to the removable metal liner, and pre-drilled base holes allow ground fixing.
Model
OTM-16A
Dimensions
50 × 30 × 93.5 cm (L × W × H)
Capacity
50 L
Color
Slat Material
Process
Metal cutting, bending, welding, grinding, powder coating and assembly
Material
Powder-coated galvanized steel body with PS wood-look slats
Features
50 L single bin; integrated rain cover; covered waste opening; lockable side service door; removable metal inner liner; pre-drilled base holes for ground fixing. Color and logo options subject to order confirmation.
Get a Quick Quote
OTM-16A Public Waste Bin with Side Service Access
Fixed wood-look faces remain in place while staff reach the liner from the side.
The OTM-16A separates its broad decorative faces from its narrow maintenance door. This layout keeps the wood-look panels facing pedestrian areas while reserving one side for collection access. The overhanging canopy gives the upper section an open profile, with a 50 L compartment below for one waste stream.
OTM-16A Commercial Trash Receptacles with a Raised Canopy
Open disposal access above, a separate servicing route below.
01
No Lid to Lift for Everyday Disposal
The raised cover leaves the disposal area accessible beneath it. Visitors can drop in litter without lifting a lid or opening the maintenance door.
02
Collection Through the Side
Staff access the compartment through a narrow metal service door. Plan clearance on this side so collection can take place with the broad wood-look faces left in position.
03
A Liner That Can Be Cleaned Separately
The metal liner can be removed for emptying and cleaning. Staff can service the container separately from the outer cabinet.
OTM-16A Public Waste Bin: Four Design Details
An overhanging top, upright supports and contrasting panels define this model.
Twin Upright Supports
Two metal uprights connect the cover to the cabinet below. Their exposed form creates a clear separation between the canopy and the waste compartment.
Vertical PS Wood-Look Panels
Narrow vertical slats fill the broad cabinet faces. The wood-look surfaces contrast with the metal corner sections, upper rim and side door.
Lockable Metal Side Door
A round lock secures the service door on the narrow side of the cabinet. Opening this door provides access to the removable metal inner liner.
Planning an OTM-16A Order?
Share your required quantity, body material, finish, ashtray option and project location.
OTM-16A Commercial Trash Receptacles for Shared Outdoor Areas
Orient the decorative faces toward users and keep the service side accessible.
OTM-16A Public Waste Bin FAQs
Installation space, disposal access, liner specification and branding explained.
01 Where Should We Allow Space for Servicing?
The cabinet footprint is 50 × 30 cm. Leave additional working room on the service-door side for opening the door, removing the liner and collecting waste. Check this access before positioning the unit beside walls or planters.
02 Does the Rain Cover Need to Be Opened for Use?
No. Users deposit litter through the open area beneath the fixed canopy. The lockable side door is used for servicing rather than everyday disposal.
03 Is the Inner Liner Stainless Steel?
The OTM-16A has a removable metal liner. Confirm the liner material specification with LVEN if your project requires a particular metal or grade; a stainless steel liner is not specified as standard.
04 Does the Canopy Keep All Rain Out?
The canopy provides overhead shelter, while the disposal area remains open. It is not a sealed enclosure, so consider wind-driven rain and site exposure when choosing the installation position.
05 Can We Order Custom Logo Trash Cans in Our Site Colors?
Color and logo options are subject to order confirmation. Provide your preferred colors, logo artwork, quantity and installation location so LVEN can review the branding method and quote the required units.
Start Your Custom Street Furniture Project with LVEN.
Start Your Project Today